|
Message
From: Ryan S.<ryan.pdg1@g...>
Date: Tue Nov 15 05:23:02 CET 2005
Subject: [usb] clueless
Hello
My name Is Ryan Standeven and I need to find some help with making a PCB for
a USB AM/FM Radio tuner
I have no experience making a hardware component for a computer but have a
little bit of experience in making other electronics. I was wondering if any
one here would know of a good site or a book that could tell me a few things
about how I could make a USB AM/FM Radio.
I actually want to try and make an AM/FM radio tuner for the Xbox... but I
know that as the development on Xbox software is in it's current state...
It's next to impossible for one to create a driver for it and the only way I
could make it accessible is if I got it to treat the radio tuner as one of
the other components it can read such as a memory card or controller with a
mic plugged in.
I'm not too enthusiastic about doing it the second way so I figure i should
just try and make one for the PC before i try anything too fancy. OpenXDK
will hopefully be mature enough by then.
And if this first project turns out well.. and maybe even if it doesn't...
I'm going to try and make a USB RF input so you can connect Cable, Satelite
and anything else that has an RF output... of course coding the software
will be challening ... but i can't even think about making the software
until I know how to build the hardware.
and again... all I need is someone to point me in the right direction
Thank you
~Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: attachment.html
|
 |
Browse
