|
Message
From: Ravi Rajaraman<ravi_prr2000@h...>
Date: Mon Apr 12 19:56:10 CEST 2004
Subject: [usb] 2.0 Hub
Hi Abukhater,
A high speed host communicates with a high speed device only in high speed.
It would be of much use to you if you could study split transfers.It is via the split
transfers that the high speed host communicates with a full/low speed device
under the hub.The hub is responsible to properly decode the split transfers and
redirect the transfers to the appropriate port. The hub at this point acts as a full/low speed
host to the full/low speed device connected to it.
Regards
Ravi Rajarman
----- Original Message -----
From: M. AbuKhater
To: usb@o...
Sent: Sunday, April 11, 2004 2:08 PM
Subject: [usb] 2.0 Hub
happy easter all;
lets say a USB2.0 hub is connected to a host , with many high-, full- and low-speed devices connected to it.
as indicated in the USB system architecture , a full speed packet is heared only by full speed devices , same for low- high-speed devices.
does this mean that the host sends low and full speed frames to high speed hub?
if not how does the hub knows which packet is should go to which device?
thanks
Abukhater
------------------------------------------------------------------------------
Do you Yahoo!?
Yahoo! Tax Center - File online by April 15th
------------------------------------------------------------------------------
_______________________________________________
attachment-0001.htm
|
 |
Browse
