|
Message
From: Somphong Sopha<somphong@c...>
Date: Mon Apr 12 16:46:04 CEST 2004
Subject: [usb] frequency?
Hi,To remain on the subject, what frequency should the low speed device run
at?
Somphong
-----Original Message-----
From: usb-bounces@o... [mailto:usb-bounces@o...] On
Behalf Of Rudolf Usselmann
Sent: Sunday, April 11, 2004 11:53 PM
To: Discussion list about free, open source USB IP core
Subject: Re: [usb] frequency?
On Sat, 2004-04-10 at 22:56, M. AbuKhater wrote:
> hello all,
>
> at what frequency should the USB1.1 core be running at? the FPGA
> synthesizer gave me a maximum of 38MHz is this enough?
> the Board I am using has a 50 MHz osclillator, Should I replace the
> ocsillator on the board, (I am using Xilinx Spartan 30Kgates ), I
> couldnt find a way for frequency division.
>
> sincerely
> Abukhater
It must be running at 48 MHz.
rudi
========================================================
ASICS.ws ::: Solutions for your ASIC/FPGA needs :::
..............::: FPGAs * Full Custom ICs * IP Cores :::
FREE IP Cores -> http://www.asics.ws/ <- FREE EDA Tools
_______________________________________________
http://www.opencores.org/mailman/listinfo/usb
|
 |
Browse
