|
Message
From: Ovi Lupas<olupas@o...>
Date: Wed Mar 10 15:05:50 CET 2004
Subject: [usb] UTMI / PHY help please
Hi,I am working right now on a USB 2.0 testbench. In my testbench,
I plan to interface the USB2.0 core with a ISP1501 behavioral model
that I am coding right now.
The interface between the two will be a small synthesizable module
written in Verilog that will be also published.
But I still have to code a while and to check it before releasing it ...
Regards,
Ovidiu Lupas.
----- Original Message -----
From: wesselin@n...
To: usb@o...
Sent: Thursday, March 04, 2004 8:22 AM
Subject: *bump* [usb] usb2 core / PHY ISP1501
----- Original Message -----
From:
wesselin@n...<wesselin@n...>
To:
Date: Thu Feb 26 13:07:12 CET 2004
Subject: [usb] usb2 core / PHY ISP1501
> hello everybody,
>
> for our (my colleague and i) graduation project we need to
> implement a usb 2 (device) link in a prototyping system. This system consists
> of a
> philips ISP1501-01 IC and an FPGA. We intended to use the usb 2
> core
> by rudi in the fpga, since the documentation stated it supported
> the
> 1501.
> However, the 1501 does not seem to comply with the core's UMTI
> interface type. The core uses a double (tx/rx) 8 bit wide interface
> @ 60
> MHz, whereas the 1501 can only be used with the 16 bit wide
> (bidirectional) interface @ 30 MHz. BTW i hope somebody can prove
> me
> wrong here... :-)
> Hence i would like to know if somebody has a workaround for this
> problem, or do we need to rewrite the entire core for a 16 bit wide
> bus?
> Has anybody actually used the 2.0 core succesfully for that matter?
> We are not native verilog developers ( we were tought VHDL) though
> it
> should probably not be a problem to learn that language...
> If nobody has used this core in conjunction with the 1501 we would
> maybe like to contribute by either writing a workaround or
> modifying the
> core so that it can work with both 8bit 60 MHz or 16 bit 60 MHz
> (only if
> that option proves to be not too much of a hastle).
> Regards,
> Egwin Wesselink
>
>
_______________________________________________
attachment.htm
|
 |
Browse
