Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: Jeremy Hammer<jeremyh@c...>
Date: Fri Aug 3 19:56:21 CEST 2007
Subject: [pci] pci_bridge32 on an Altera Cyclone II
Hi,

I am going through the compile output and these lines are particularly
concerning to me.

Info: Pin pci_framen has a permanently disabled output enable
Info: Pin pci_irdyn has a permanently disabled output enable

Info: Pin pci_framen has VCC driving its datain port

I am following the signals to their origin and they seem to be fine,
although it gets difficult to tell when you go in deep.

Also, I put the PCI I/O assignments on and it didn't help. And yes I
found the correct way to assign the PCI I/O assignments to the pins.

What are your thoughts on the three "Info" lines from my compile?

Thanks!
-Jeremy

Follow up	Author
[pci] pci_bridge32 on an Altera Cyclone II	Mark McDougall