|
Message
From: Mau Liste<liste@s...>
Date: Tue Mar 27 11:12:34 CEST 2007
Subject: [pci] PCI Target
Thanks all for the suggestions ... I think I will continue to try with
the full bridge.
I will come back for news or other questions.
Thanks again.
Mau.
Mark McDougall wrote:
> Mau Liste wrote:
>
>> For this application, I can probably accept these limitations. But
>> aside from limitations ... does it work? It doesn't look much
>> maintained/documented, so I want to check if I am alone on that road,
>> or if there are others to share comments/bug fixes with.
>
> No idea - we couldn't live with the limitations...
>
>>>> On the other side, is it possible to tear down the full PCI
>>>> Bridge with only the functionality I need (some ifdefs, maybe)?
>>> The optimiser does a reasonable job without having to tear anything
>>> out.
>> I've see that, but what remains after tying unused input to gnd, does
>> not look much working (just tried few simulations). But I will
>> continue to check ...
>
> I'd try it leaving everything connected and tie wishbone bus to
> gnd/unknown first to check that it all still works. Then you can
> incrementally tie unused inputs and disconnect unused outputs and check
> each step of the way...
>
> Regards,
>
|
 |
Browse
