|
Message
From: Mark McDougall<markm@v...>
Date: Tue Mar 27 10:02:49 CEST 2007
Subject: [pci] PCI Target
Mau Liste wrote:> For this application, I can probably accept these limitations. But
> aside from limitations ... does it work? It doesn't look much
> maintained/documented, so I want to check if I am alone on that road,
> or if there are others to share comments/bug fixes with.
No idea - we couldn't live with the limitations...
>>> On the other side, is it possible to tear down the full PCI
>>> Bridge with only the functionality I need (some ifdefs, maybe)?
>> The optimiser does a reasonable job without having to tear anything
>> out.
> I've see that, but what remains after tying unused input to gnd, does
> not look much working (just tried few simulations). But I will
> continue to check ...
I'd try it leaving everything connected and tie wishbone bus to
gnd/unknown first to check that it all still works. Then you can
incrementally tie unused inputs and disconnect unused outputs and check
each step of the way...
Regards,
--
Mark McDougall, Engineer
Virtual Logic Pty Ltd, <http://www.vl.com.au>
21-25 King St, Rockdale, 2216
Ph: +612-9599-3255 Fax: +612-9599-3266
|
 |
Browse
