Message

Reply | Reply all

Date Prev | Date Next | Thread Prev | Thread Next Date Index | Thread Index

From: jtrabal at engin.umass.edu<jtrabal@e...>
Date: Wed Jul 13 22:23:00 CEST 2005
Subject: [pci] Trying to build CRT example with webpack 5.1 and the Memec 2S200 Board
Hi,

I am also trying to implement the CRT example with webpack 7.1 using
the MEMEC 2S200 Board . Does anyone has the .UCF file for that
board? Thanks for your help.

Jorge

----- Original Message -----
From: yhy34 at 126.com<yhy34@1...>
To:
Date: Tue Apr 5 15:28:51 CEST 2005
Subject: [pci] Trying to build CRT example with webpack 5.1 and the
Memec
2S200 Board

> ----- Original Message -----
> From: Uwe Bonnes <bon@e...>
> To: pci@o...
> Date: Tue, 28 Jan 2003 17:14:38 +0100
> Subject: Re: [pci] Trying to build CRT example with webpack 5.1 and
> the Memec 2S200 Board
> >
> >
> > >>>>> "Miha" == Miha Dolenc
> > <mihad@o...> writes:
> >
> > Miha> Hello! I don't know a lot about WebPack software, so
> > I can't help
> > Miha> you there. The crt application is not VGA compatible,
> > that is why
> > Miha> computer will beep, even when the card is detected.
> > We used
> > Miha> special frame buffer driver for linux, to be able to
> > display X
> > Miha> Windows using the card. The thing I don't understand
> > is why the
> > Miha> card is not detected. Can you run "/sbin/lspci
> -v"
> > when linux
> > Miha> boots and check if the card is detected by linux?
> >
> > The test I reported where done on a plain motherboard, without
> any
> > bootable
> > medium. I only looked whether the card was recognized in the
> bios.
> > Now I
> > plugged in the card into my normal PC (with my normal APG
> cards as
> > first
> > video card) and it booted. Again, the card was not reported by
> the
> > bios, but
> > lspci reports:
> > 00:0d.0 Bridge: Unknown device 2321:0001 (rev 01)
> >
> > I could also insmod spartan_fb.o after recompiling, and after
> > "modprobe
> > fbcon-mac" . The kernel reports:
> > vesafb: framebuffer at 0xcf80000, mapped to 0xccf80000, size
> 300k
> > vesafb: mode is 640x480x8, linelength=640
> > vesafb: scrolling: redraw
> > Console: switching to colour frame buffer device 80x30
> > fb0: VESA VGA 1 frame buffer device
> > fb0: VESA VGA 1 frame buffer device
> >
> > However I can't test with a monitor yet, as I placed the VGA
> > connector on my
> > plug-in Board in such a silly position, that I can't connect
> the
> > cable. I
> > have to think about an easy workaround and will report later.
> >
> > Regarding Webpack: You can download Webpack for free from the
> > Xilinx
> > site with a license for unlimited time and for recent devices
> with
> > sensible
> > size (e.g. up to XC2S300E). XST as synthesis tool is included.
> I
> > think you use synplify as synthesis tool for openpci. I don't
> know
> > of a
> > Snyplify version free of costs and not time limited. So with
> > webpack, only
> > tools free of costs are involved in the toolchain (icarus,
> webpack,
> > naxjp or
> > impact from xilinx). So I guess, people will appreciate
> support
> > for webpack in openpci. Download is about 160MByte, and the
> > diskspace
> > installed is about 550 MByte. If you decide to test webpack,
> let me
> > know if
> > you need help.
> >
> > I would also like to upload at least the ucf file modified for
> the
> > Memec
> > Spartan200 board. Obviously the Eagle design file for the plug > in > > board are > > not yet ready to use without modification, but at least they > define > > the > > connectors and more. > > > > Bye > > -- > > Uwe Bonnes bon@e... > > > > Institut fuer Kernphysik Schlossgartenstrasse 9 64289 > Darmstadt > > --------- Tel. 06151 162516 -------- Fax. 06151 164321 > ---------- > > > >