|
Message
From: machosreeram@y...
Date: Thu, 3 Apr 2003 20:24:23 -0100
Subject: Re: [pci] PCI interface of FPGA to SUN Sparc workstation
Hi Jose,
thanks for your follow up.
I have one more doubt , If I were to develop the interface myself
,should I know about the SUN OS architecture and do assembly language
progg from the SUN side followed by VHDL progg from the FPGA side so
that they interact through the PCI pin signals or protocol.
Do you happen to know of any free PCI cores ,which i can use as a
starting point.If so kindly do let me know .
As for the other paid option would XILINX /ALTera provide cores and
support for them too through development software for interfacing
through interrupts the SUN workstation and the FPGA,or do I have to
develop my own software for that.
Thanks again for your respone,
Sriram
ps no am not spanish ..
----- Original Message -----
From: José López <maxjosel@y... >
To: pci@o...
Date: Thu, 3 Apr 2003 16:37:29 +0200 (CEST)
Subject: Re: [pci] PCI interface of FPGA to SUN Sparc workstation
> Hello
>
> Firts of all, if you're planning to connect a board to a sun
> workstation you should choose what type of bus. if you choose the
> PCI bus there are several options:
>
> 1) To design on yourself the interface: I think the starting point
> is the book "PCI System Architecture". Then you should choose the
> FPGA: cyclone from Altera for example.
>
> 2) To get a free PCI core and maybe optimizate the code.
>
> 3) If you are not used to work with FPGA, use a core from Altera
> or Xilink.
>
> There are PCI board available from diferents manufactures or
> distributors: Altera, Memec,..
>
> see you,
>
> jose lopez, maxjosel@y...
>
> note: are you spanish?
>
> machosreeram@y... wrote:
> Hi,
> I'm planning to interface a SUN workstation to an FPGA on a
> development board using perhaps a PCI bus i.e run computationally
> intensive parts of an algorithm on the fpga,by using an interrupt
> mechanisam(or function call to the fpga).
> What are the issues I should look at and what would be a starting
> point
> to develop the interface,or there any regular off the shelf
> products
> which can be used either directly or with slight modification.
> Kindly do help me out.
> Thanks,
> Sriram
>
>
|
 |
Browse
