|
Message
From: Attila Kinali<attila@k...>
Date: Mon Jul 23 18:38:43 CEST 2007
Subject: [oc] Connecting single PCI device to FPGA
On Wed, 18 Jul 2007 10:26:21 +0200 (CEST)
yasirmm@g... wrote:
> Currently I am facing two problems:
> 1. How to control the Lynx Chip as PCI local bus, and
use a PCI core and a pci host controller. Do the rest as the
software driver for the chip.
> 2. How, if Im using a PCI core, to actually connect the signals from
> the PCI core to the TSB82AA2 as both have the same exact signals on
> them. (For example, signal Request is an input on FPGA core as well as
> on the TSB82AA2)
Read the PCI standard, it explains it.
>
> p/s: Pankaj Pailwar, could you please explain:
> "A PCI32 device can be controlled just by using some simple buffers"
> Looks very interesting. Thanks!
Understand the PCI standard, then it's easy.
Attila Kinali
--
Praised are the Fountains of Shelieth, the silver harp of the waters,
But blest in my name forever this stream that stanched my thirst!
-- Deed of Morred
|
 |
Browse
