|
Message
From: Richard Herveille <richard@a...>
Date: Wed, 19 Mar 2003 09:32:00 +0100
Subject: Re: [oc] =?utf-8?q?=E7=AD=94=E5=A4=8D=3A=20=5Boc=5D=20Re=3A=20=5Boc=5D=20=E7=AD=94=E5=A4=8D=3A?==?utf-8?q?=20=5Boc=5D=20Suggesting=20H263codec?= core
Please send this mail to the video mailing list video@o....
That's the place to discuss these projects.
Richard
> hi
> dear sir
> I am electronic enginner with 3 years exp. , my M.Sc. project was
> " FPGA implementation of Image Compression system" and uses wavelet
> and DCT and other codings in my project .
> now i am intrested in Video phone systems , then intrested in H.263
> coding for Video compression.
> i will be happy to join in your project.
>
> Regards.
>
> Amir Memar
> amemar@e...
>
>
> ----- Original Message -----
> From: lin.sheng@m...
> To: cores@o...
> Date: Thu, 27 Sep 2001 09:55:43 +0800
> Subject: [oc]
> =?gb2312?B?
> tPC4tDogW29jXSBSZTogW29jXSC08Li0OiBbb2NdIFN1Z2dlc3Rpbmc=?=
> H263codec core
>
> > Dear Arshad,
> > I think this project is very worthy of our effort. But it is also
> > very
> > difficult. I have about 2 years experience in studing the image and
> > video
> > compression algorithm. And I have also done something in area of
> > PCB and
> > FPGA design. I know some basics of the H.263 standard, but the
> > details are
> > not clear. As my knowledge, the codec should at least have such
> > component,
> > dct, idct, motion estimation, motion compensation, entropy codec,
> > bitstream
> > formatter and bitstream deformatter. Maybe there should have some
> > other
> > component, we can discuss about it.
> >
> > Best Regards!
> > Lin Sheng
> >
> >
> >
> >
> > "Arshie"
> > <arshie@hotmail 收件人：
> > <cores@o... >
> > .com> 抄送：
> > 发件人： 传真致：
> > owner-cores@ope 主题： [oc] Re: [oc]
> > 答复: [oc] Suggesting H263
> > ncores.org codec core
> >
> >
> > 01-09-26 13:52
> > 请答复 给 cores
> >
> >
> >
> >
> >
> >
> > Dear Lin,
> >
> > Its great to see the momentum buildup! I would like to know whats
> > your
> > feeling about this project. I would like to start the studying
> > phase
> > immediately. I am going through the ITU H263 spec right now. I will
> > be able
> > to come up with a work plan quite soon. In the mean time you can
> > also do
> > some study about the spec. and identify the major componensts that
> > will be
> > involved. If you dont have the spec then do let me know I shall
> > forward it
> > to u.
> >
> > In the mean time I would appreciate if you tell me a little bit
> > more about
> > your educational and professional background.
> >
> > And we also have to figure out how to get this project listed on
> > the
> > opencores web site.
> >
> > Lets do it!!
> >
> > Arshad S. Farooqui
> >
> > ----- Original Message -----
> > From: <lin.sheng@m... >
> > To: <cores@o... >
> > Sent: Tuesday, September 25, 2001 7:48 PM
> > Subject: [oc] 答复: [oc] Suggesting H263 codec core
> >
> > > Hi,
> > > I am very interested at this project. I am also experienced
> >
> > in video
> >
> > > compression and FPGA designing. If I can help in this project,
> >
> > please let
> >
> > > me know. I will be very glad to take part in.
> > >
> > > Best Regards!
> > > Lin Sheng
> > >
> > >
> > >
> > >
> > > "Arshie"
> > > <arshie@hotmail ê??tè?￡o
> >
> > <cores@o... >
> >
> > > .com> 3-?í￡o
> > > ·￠?tè?￡o ′?????￡o
> > > owner-cores@ope ?÷ìa￡o [oc]
> >
> > Suggesting H263
> > codec core
> >
> > > ncores.org
> > >
> > >
> > > 01-09-26 04:08
> > > ??′e?′ ?? cores
> > >
> > >
> > >
> > >
> > >
> > >
> > > Hi friends,
> > >
> > > I am an electronics/communication engineer with 3 years of
> >
> > experience in
> >
> > > developing MPEG drivers for various set top box chipsets. I am
> >
> > interested
> >
> > > in developing an H.263 codec that can be used for video
> >
> > confrencing over
> >
> > > low bitrate lines or mobile phones. I foresee this kind of
> >
> > project
> > finally
> >
> > > leading too an MPEG4 or other advanced cores. But, as of now I
> >
> > just want
> > to
> >
> > > make a head start with the H263 core. So if any one is
> >
> > interested please
> >
> > > reply asap. At this point I would like to tell you that I have
> >
> > no prior
> >
> > > experience of ASIC design and have not touched HDL till date,
> >
> > but I can
> >
> > > assure you that I am quite good at digital circuit design.
> >
> > I'll try my
> >
> > > level best to catch up with HDL.
> > >
> > > I shall be very grateful if anyone can help me on how to
> >
> > proceed from
> > here.
> >
> > > With best regards
> > > Arshad S. Farooqui
|
 |
Browse
