|
Message
From: "henry_xb" <xxiaobin@2...>
Date: Wed, 19 Mar 2003 13:53:0 +0800
Subject: =?GB2312?Q?Re: Re: [oc] =B4=F0=B8=B4: [oc] Re: [oc] =B4=F0=B8=B4: [oc] Suggesting H263codec?==?GB2312?Q? core?=
Hi AMemar！
If possible ,I want to be your partner.
I have about 3 years ASIC design exp. in design communication chip.
Best Regard
henry_xb
xxiaobin@2...
2003-03-19
======= 2003-03-19 06:42:00 in Your email：=======
>hi
>dear sir
>I am electronic enginner with 3 years exp. , my M.Sc. project was
>" FPGA implementation of Image Compression system" and uses wavelet
>and DCT and other codings in my project .
>now i am intrested in Video phone systems , then intrested in H.263
>coding for Video compression.
>i will be happy to join in your project.
>
>Regards.
>
>Amir Memar
>amemar@e...
>
>
>----- Original Message -----
>From: lin.sheng@m...
>To: cores@o...
>Date: Thu, 27 Sep 2001 09:55:43 +0800
>X-Virus: 6
>Subject: [oc]
>=?gb2312?B?
>tPC4tDogW29jXSBSZTogW29jXSC08Li0OiBbb2NdIFN1Z2dlc3Rpbmc=?=
>H263codec core
>
>>
>>
>>
>> Dear Arshad,
>> I think this project is very worthy of our effort. But it is also
>> very
>> difficult. I have about 2 years experience in studing the image and
>> video
>> compression algorithm. And I have also done something in area of
>> PCB and
>> FPGA design. I know some basics of the H.263 standard, but the
>> details are
>> not clear. As my knowledge, the codec should at least have such
>> component,
>> dct, idct, motion estimation, motion compensation, entropy codec,
>> bitstream
>> formatter and bitstream deformatter. Maybe there should have some
>> other
>> component, we can discuss about it.
>>
>> Best Regards!
>> Lin Sheng
>>
>>
>>
>>
>> "Arshie"
>> <arshie@hotmail 收件人：
>> <cores@o... >
>> .com> 抄送：
>> 发件人： 传真致：
>> owner-cores@ope 主题： [oc] Re: [oc]
>> 答复: [oc] Suggesting H263
>> ncores.org codec core
>>
>>
>> 01-09-26 13:52
>> 请答复 给 cores
>>
>>
>>
>>
>>
>>
>> Dear Lin,
>>
>> Its great to see the momentum buildup! I would like to know whats
>> your
>> feeling about this project. I would like to start the studying
>> phase
>> immediately. I am going through the ITU H263 spec right now. I will
>> be able
>> to come up with a work plan quite soon. In the mean time you can
>> also do
>> some study about the spec. and identify the major componensts that
>> will be
>> involved. If you dont have the spec then do let me know I shall
>> forward it
>> to u.
>>
>> In the mean time I would appreciate if you tell me a little bit
>> more about
>> your educational and professional background.
>>
>> And we also have to figure out how to get this project listed on
>> the
>> opencores web site.
>>
>> Lets do it!!
>>
>> Arshad S. Farooqui
>>
>> ----- Original Message -----
>> From: <lin.sheng@m... >
>> To: <cores@o... >
>> Sent: Tuesday, September 25, 2001 7:48 PM
>> Subject: [oc] 答复: [oc] Suggesting H263 codec core
>>
>>
>> >
>> > Hi,
>> > I am very interested at this project. I am also experienced
>> in video
>> > compression and FPGA designing. If I can help in this project,
>> please let
>> > me know. I will be very glad to take part in.
>> >
>> > Best Regards!
>> > Lin Sheng
>> >
>> >
>> >
>> >
>> > "Arshie"
>> > <arshie@hotmail ê??tè?￡o
>> <cores@o... >
>> > .com> 3-?í￡o
>> > ·￠?tè?￡o ′?????￡o
>> > owner-cores@ope ?÷ìa￡o [oc]
>> Suggesting H263
>> codec core
>> > ncores.org
>> >
>> >
>> > 01-09-26 04:08
>> > ??′e?′ ?? cores
>> >
>> >
>> >
>> >
>> >
>> >
>> > Hi friends,
>> >
>> > I am an electronics/communication engineer with 3 years of
>> experience in
>> > developing MPEG drivers for various set top box chipsets. I am
>> interested
>> > in developing an H.263 codec that can be used for video
>> confrencing over
>> > low bitrate lines or mobile phones. I foresee this kind of
>> project
>> finally
>> > leading too an MPEG4 or other advanced cores. But, as of now I
>> just want
>> to
>> > make a head start with the H263 core. So if any one is
>> interested please
>> > reply asap. At this point I would like to tell you that I have
>> no prior
>> > experience of ASIC design and have not touched HDL till date,
>> but I can
>> > assure you that I am quite good at digital circuit design.
>> I'll try my
>> > level best to catch up with HDL.
>> >
>> > I shall be very grateful if anyone can help me on how to
>> proceed from
>> here.
>> >
>> > With best regards
>> > Arshad S. Farooqui
>> >
>> >
>> >
>> >
>>
>
= = = = = = = = = = = = = = = = = = = =
|
 |
Browse
