|
Looking for John Clayton authour of the
rs232_sys_con core but if any one else can answer that is just as
fine.
Hi
John,
I intend
using your core in a network controller that I am designing , I'll be using a 30
MHz clock.
I have gone through the documentation os
RS232_SYS_CON but the example given has probably a typing error
followning I have taken out of the comments in
serial.v
clock_factor=16
lowest_rate=9600
Fclk=49.152
MHz
clock_factor*(Fclk/lowest_rate) = 320 <-- How
this comes to be 320 with the above values
I have a 30 MHz oscilator on board and would
appriciate your help! also is the code available in VHDL as well.
Thanks
Shehryar Shaheen
PEI Technologies
University
of Limerick
Ireland
| 
Browse
